Design 제품군

	Advantest T5581, T5581H, T5365, T5365P, T5335, T5335P, T5371, T5585, T5591, T5592, T5593, T5377, T5593, T5588, T5503 Teradyne J995, J996 Hitachi-Deco HS5060R, HS5060Q, HS5060S, HA6500 ANDO Tester AL6090, AL6095, AL6080, AL9341, AL6050 Other Magnum

 

 

 

	Design TAT

	PCB 기구 Remark Dut Board Type 제품군 7일 3일 COK/Device/Socket Inform 완료후 TAT Cable Type 제품군 7일 4일

 

 

 

	Manufacture TAT

	PCB 기구 System Dut Board Type 제품군 7일 10일 T5588 512Para 3.5주 Cable Type 제품군 7일 8일 T5585 / T5375 3주

 

 

 

	Manufacture Specification

Item Standard Advanced Engineering Impedance Control 10% 7% 5% Pattern Width Inner Layer 0.003" 0.075mm 0.0024" 0.06mm 0.002" 0.05mm Outer Layer 0.0036" 0.09mm 0.0028" 0.07mm 0.0024" 0.06mm Drill to Copper 13.4" x 16" 0.0035" 0.089mm 0.003" 0.075mm 0.0028" 0.07mm 16" x 20" 0.0035" 0.089mm 0.003" 0.075mm 0.0028" 0.07mm 20" x 24" 0.004" 0.1mm 0.003" 0.075mm 0.0028" 0.07mm 13.4" x 26" 0.004" 0.1mm 0.003" 0.075mm 0.0028" 0.07mm BGA Pitch 0.02" 0.5mm 0.014" 0.35mm 0.012" 0.3mm Immersion Gold 1.2μ" 0.5㎛ 12μ" 0.3㎛ 20μ" 0.5㎛ Electrolytic Hard Gold 20μ" 0.5㎛ 50μ" 1.27㎛ 60μ" 1.5㎛ Max. Number of Layer 48 72 74+ Min. Hole Size 0.008" 0.2mm 0.005" 0.125mm 0.004" 0.1mm Max. Panel Size 24." x 26.0" 610 x 660mm 24.4" x 28.8" 610 x 720mm 24.4" x 28.8" 610 x 720mm Max. Board Thickness 0.189" 4.8mm 0.288" 7.2mm 0.291" + 7.4mm + Max. Aspect Ratio on 0.248" Thickness 12:1 26:1 32:1 Max. Aspect Ratio on 0.197" Thickness 14:1 25:1 33:1 Other Plugging, Back Drill Build-up

 

 

 

	Controlled Impedance

	Impedance Single-ended 50~110 ohm Differential 100~150 ohm Impedance Tolerance 50 ohm 10% (7%, 5%) 90 ohm 10% 100 ohm 10% Impedance Type Single-ended Micro, Dual, Symmetrical, Embedded Differential Micro, Symmetrical, Dual, Embedded, Broadside coupled Coplanar Micro, Symmetrical, Dual, Embedded